PY

Cone Crusher is normally to crush mid-hard and above mid-hard ores and rocks. It is popular stone crushing machines in manufactured sand production, aggregates production and mining operations. Cone crusher is used in secondary, tertiary crushing stages.

35-200mm

Feed Size

30-280kW

Power

10–800t/h

Capacity

Online Chat

Advantages Of PY Series Spring Cone Crusher

Spring cone crusher is a medium and fine crushing equipment, the spring is not only a safety device but also affects the crushing force. The crushing chamber type is determined by the ore use: the standard type is suitable for medium crushing, the medium type is suitable for fine crushing, and the short head type is suitable for ultrafine crushing. Spring cone crusher is suitable for crushing hard and medium hard ores and rocks, such as iron ore, copper ore, limestone, quartz, granite, basalt, diabase, etc., widely used in metallurgy, construction, road construction, chemistry and phosphate and other industries.

High Quality

Cone crusher insurance system adopts spring overload protection, dry oil (or water) in the form of the seal to improve performance.
Good Performance

Heavy-duty design and use of high-quality components with optimized wear parts keep the operating costs down.
Customized Design

Users could choose a PYB based on the standard head type, PYD short head type, PYZ for medium crushing chamber to get required crushed stone size.
Easy Maintenance

Easy maintenance, and easy to operate. Laminated crushing process makes the final material in good grain shape.

Application Of PY Series Spring Cone Crusher

Spring cone crusher is suitable for crushing hard and medium hard ores and rocks, such as iron ore, copper ore, limestone, quartz, granite, basalt, diabase, etc., widely used in metallurgy, construction, road construction, chemistry and phosphate and other industries.

What Is The Working Principle Of PY Series Spring Cone Crusher

Cone crusher is a compression type of stone crusher. The feeding rock is crushed by squeezing or compressing the feed material between a wear resistant mantle and a manganese concave or a bowl liner.
The mantle is a moving part that gyrates in an eccentric motion though an eccentrically gyrating spindle. When rock enters the top of the cone crusher, it is squeezed between the mantle and the bowl liner or concave, as the eccentric spindle rotates to cause the compression within the chamber. The material gets smaller as it moves down through the wear liner as the opening in the cavity gets tighter. Large pieces of ore are broken once, and then fall to a lower position where they are broken again. This process continues until the pieces are small enough to fall through the narrow opening at the bottom of the crusher. Final sizing and reduction is determined by the closed side setting or the gap between the two crushing members at the lowest point.
Spring system plays the role of overload protection, which will enable the exotic materials or steel piece to pass through the crushing chamber without any damage to the machine.

Model And Technical Parameter

Model	Diameter of Cone (mm)	Adjustable Discharging Opening (mm)	Max Feeding Size (mm)	Capacity (t/h)	Power (kW)	Weight (t)
PYB600	600	12-25	65	15-25	30	5.5
PYD600	600	3-13	36	5-23	30	5.5
PYZ900	900	15-50	115	50-90	55	10.18
PYZ900	900	5-20	60	20-65	55	10.19
PYD900	900	3-13	40	15-50	55	10.27
PYB1200	1200	20-50	145	110-200	110	24.7
PYZ1200	1200	8-26	100	50-150	110	25
PYD1200	1200	3-15	50	18-105	110	25.6
PYB1750	1750	25-60	215	280-480	155-160	50.6
PYZ1750	1750	10-30	185	115-320	115-160	51
PYD1750	1750	5-15	85	75-230	155-160	50.5
PYB2200	2200	30-60	300	590-1000	260-280	84
PYZ2200	2200	10-30	235	200-580	260-280	85
PYD2200	2200	5-16	110	120-370	260-280	85